ModaPAVE Formats at a Glance: Rectangular Slabs, Polygonal Shapes, and Modular Options
Here’s where outdoor paving plans quietly break: teams pick a “look” first, then discover the geometry they drew doesn’t exist in the installation category they need. ModaConcrete’s ModaPAVE line is built around distinct formats—rectangular slabs, polygonal shapes, and an 8×16 modular paver—and each one changes what’s possible in layout, joints, and transitions.
Rectangular slabs: the two baseline sizes that drive most layouts
ModaPAVE’s large-format family centers on two rectangles—24×24 and 32×16—available in both grade-set and pedestal versions. That matters because the same plan language can move from a plaza condition to a raised deck condition without switching to an unrelated surface module. Miss that early, and the project becomes a patchwork of “close enough” substitutions.
What most paving approaches get wrong is assuming format is just aesthetics. Format is coordination. Rectangles set the rhythm for joint spacing, alignments at thresholds, and how cleanly a field can terminate at walls, drains, and steps.
In a hypothetical mixed-use courtyard, compare a layout using the published slab sizes with the project’s actual boundaries and details. Format selection does not guarantee fewer cuts.
ModaConcrete lists these large-format slabs as part of the ModaPAVE paver family in its 2026 catalog overview.
Polygonal shapes: when the plan needs direction, not just coverage
ModaPAVE’s polygon options aren’t decorative “variants.” They are geometry with consequences. The elongated Hexagon is a wet-cast paver measuring 21.65 × 15.75 × 1.75 inches, designed for grade-set installation, with tempered/eased edges and full-depth integral color in White, Gray, Platinum, Sand, or Graphite.
That stretched six-sided footprint creates directional pull in a way rectangles don’t. The mechanism is simple: longer faces extend sightlines, and angled joints break the “corridor” effect that rigid grids create in narrow runs. Ignore this, and the space reads flatter than the rendering promised.
The Pentagon is the five-sided companion format: 21 × 16 × 1.75 inches, also wet-cast, tempered/eased edges, full-depth integral color in White, Gray, Platinum, Sand, or Graphite, and explicitly grade-set only. That “only” is the point. If your concept assumes a raised pedestal deck, these shapes don’t bail you out later.
For reference, see the product descriptions for ModaPAVE in the brand’s catalog and product navigation, and confirm the current polygon format pages/spec sheets during specification.
Hyperion modular pavers: the 8×16 option that changes driveway planning
Hyperion is the modular member of the ModaPAVE family, and it plays a different role than large slabs. It’s an 8 × 16 inch high-density pressure-cast (HyperCast) modular paver offered in 2-inch pedestrian and 3.5-inch vehicular thicknesses, in Natural, Gray, Graphite, or Sand.
Hyperion’s published thickness categories provide product information for planning. Confirm the exact product and project requirements with the manufacturer and project team; a listed thickness alone does not establish suitability for a specific driveway.
Hyperion’s published dimensions and thickness options are listed on the ModaPAVE product family materials and in the catalog overview that calls out Hyperion as the modular driveway paver option.
Here’s the failure pattern: geometry decisions lock in everything else
In a hypothetical courtyard, changing from a rectangular grid to polygons could require the team to revisit joints and edges. Review the proposed layout before finalizing it.
This isn’t a surface selection problem. It’s an identity problem: the geometry is the design language, and switching languages midstream fractures the entire kit-of-parts.
Confirm layout changes with the project team. This example does not establish procurement delays, competitive losses, or revenue effects.
Color planning: what stays consistent, and what doesn’t
ModaPAVE color planning is format-specific, so assuming one palette spans every geometry is how mismatches get specified. The polygonal shapes (Hexagon and Pentagon) are offered in White, Gray, Platinum, Sand, and Graphite with full-depth integral color. Hyperion’s published palette is Natural, Gray, Graphite, and Sand. Shared color names do not guarantee a finish match; compare current samples.
Confirm the selected combinations with ModaConcrete through current samples. A shared manufacturer does not guarantee identical finishes across product families. See: ModaConcrete Catalog.
One line to keep: Volume without format clarity becomes visibility debt on the jobsite. The install crew won’t solve a geometry mismatch with craftsmanship. They’ll solve it with cuts.
How to decide: match format to constraints before you draw the pattern
ModaPAVE includes slab products offered in pedestal versions. Confirm the selected product, support system, and project requirements with the manufacturer and qualified project team; availability of a pedestal version alone does not establish rooftop suitability.
For a grade-set field, compare the Hexagon and Pentagon layouts using current product documentation and samples.
Hyperion is offered in published pedestrian and vehicular thickness categories. Confirm the exact selected product and project requirements before specification.
Verify current dimensions, installation categories, samples, and project requirements before finalizing the layout.
Frequently Asked Questions
What ModaPAVE formats are currently called out in the ModaConcrete catalog?
ModaConcrete’s 2026 catalog overview calls out large-format 24×24 and 32×16 slabs (in grade-set and pedestal versions) and the Hyperion modular paver for driveways. Source: ModaConcrete Catalog.
What are the dimensions and installation category for ModaPAVE Hexagon and Pentagon?
Hexagon is 21.65 × 15.75 × 1.75 inches and is a grade-set category. Pentagon is 21 × 16 × 1.75 inches and is explicitly grade-set only. Both are wet-cast with tempered/eased edges and offered in White, Gray, Platinum, Sand, or Graphite with full-depth integral color (iron-oxide pigment integrated into the concrete). Confirm current spec sheets on the ModaPAVE pages before issuing final construction documents.
What is ModaPAVE Hyperion, and what thicknesses are available?
Hyperion is an 8 × 16 inch high-density pressure-cast (HyperCast) modular paver offered in 2-inch pedestrian and 3.5-inch vehicular thicknesses, in Natural, Gray, Graphite, or Sand. Start at ModaPAVE for current product documentation.
What’s the fastest next step if I’m specifying ModaPAVE for a project?
Contact ModaConcrete about the selected formats and current documentation. Review site-specific installation requirements with the project team.
Author
Camille Navarro is a design analyst covering architectural concrete trends, material innovation, and modern design applications for ModaConcrete—focused on how format, surface rhythm, and coordinated color systems shape real specification outcomes.
Next step
Compare the selected formats against the site drawings, current product documentation, and samples. Contact ModaConcrete and the project team to confirm project requirements.